How Do I Clean My Reverse Osmosis System

Whether yous're a DIY homeowner, plumber or water treatment professional, it's crucial that y'all know how to properly treat your water handling systems at the home or cottagein gild to keep them running optimally.

Today Gary the H2o Guy is going to show you lot how to clean and disinfect your Reverse Osmosis organisation like a pro!

GETTING STARTED

Before we begin, I will address that if yous are on a chlorinated water source or have an Ultraviolet (UV) Disinfection organisation on well h2o, the chances of leaner growth on your RO organisation is minimal. Notwithstanding, if it has been a few years since the last disinfection or installation you are definitely due!

Prior to starting the cleaning process, make certain that you lot plan alee and take replacement filters and membranes ready as y'all will need to throw away all of the existing filters and the membrane on your RO unit when you clean and disinfect it. You tin become RO replacement filters and membranes shipped right to your door via our website hither!

Some boosted tips to brand sure you minimize the chances of introducing leaner into your RO whenever you practice a filter alter are beneath.

1. Always make sure you wash your easily with soap and h2o or put on gloves before you lot begin.
2. Brand sure your piece of work surface area is clean and put down a clean material.
3. Exist certain to keep all filters in their packaging until but before installation.

To empathize why you need to clean and disinfect your RO unit, it's important to understand how Opposite Osmosis drinking water systems work to make clean up your drinking water. So before you lot get-go, bank check out my YouTube video here.

Too, you'll be disconnecting the tubing during this procedure so if you aren't sure how, watch this YouTube video of mine first to acquire how.

Okay, great! Ready to begin cleaning your RO system? Permit'due south go started!

1. 

   Shut off the water supply to the RO system. If there is whatsoever mold on the outside of the system or the tank, now it the time to disconnect and thoroughly wash the organization to remove.
2. If your RO is continued to your refrigerator or ice maker, shut off the water line going to the water ice maker.
3. Open the Contrary Osmosis faucet and bleed all water from the RO and storage tank.
4. Once empty, close RO faucet.
5. Open the sediment filter housing, which is the closest or first filter to the feed water line. Remove and discard the filter, leaving the filter housing off.
6. Remove and discard all remaining filters and the membrane. If you accept an inline post filter, leave information technology in identify temporarily. For instructions on installing and removing filters click here.
7. Supercede all empty filters housings, except the sediment housing. There should be no filters or membrane in any housings at this point.

8. 

   Cascade i parcel of no-mess Sani-Organization sanitizer into the sediment filter housing. We utilise this because Sani-Organisation Disinfectant is the merely EPA registered & NSF approved sanitizer to be used in Water Softeners and Reverse Osmosis Drinking Water systems. It is proven to kill 99.99% of harmful bacteria in water softeners and RO units without using chlorine, oxidizers or acids which could damage equipment parts and resin! Available in our eStore here.
9. Replace the sediment filter housing with the sanitizer solution inside.
10. Put a close off valve on the drain line in the open position.
11. Plough on the water supply to fill the RO with the sanitizing solution. As water starts to flow out of the drain line, shut the drain line off.
12. Cheque for leaks.
13. Allow organization to fill with water. Time will vary depending on water force per unit area; however, organisation should exist full within v-10 minutes without the filters or membrane installed. Plough on the RO faucet until water begins to menstruum out, so plough off the faucet.
14. Permit system disinfect for five minutes without whatever water usage.
15. Flush RO by turning on the RO faucet and letting water run through the system for 5 minutes, or until disinfectant odour is gone. Open drain line valve.
16. Close off the water supply line. Open the RO faucet to drain the RO completely.
17. Install new filters and membrane. Follow this video for the how-to steps if you're unsure.
18. Turn on the cold water supply line and check for leaks.
19. The RO organization will take a couple of hours to refill. Flush new membrane and filter three times allowing storage tank to refill between flushes.
20. Reconnect the RO to the fridge or water ice maker.

There you have it! Your squeaky clean, disinfected RO organisation is gear up for use and you tin enjoy peace of listen knowing that your h2o is safe to potable and bacteria-gratuitous. Hope this step-by-pace DIY demo was helpful!

Have questions or demand more help? Achieve out to the states here or check out our full YouTube channel playlist for more awesome videos from #GaryTheWaterGuy on h2o treatment equipment troubleshooting, tips and tricks.

Become here for your next Contrary Osmosis Drinking Water video and I'll see you there!

Video Transcript

Gary The Water Guy:
Are you worried about bacteria in your family's reverse osmosis drinking water system? When was the last time you cleaned and disinfected it? Is in that location mold growing on the outside? That can't exist good. Well, in this video, I'grand going to prove yous how to clean and disinfect the opposite osmosis drinking water organisation in your dwelling for your family unit, starting right at present.

Gary The H2o Guy:
Hi, I'yard Gary The H2o Guy and I simplify water filtration to aid you conquer crappy water for your family. Now, whether y'all're a do it yourself homeowner, a plumber or a h2o treatment professional, you need to know how to clean and disinfect a reverse osmosis drinking water system.

Gary The Water Guy:
Yes, I know if you lot're on a chlorinated water supply, or if yous have an ultraviolet disinfection organisation on your whole house, before your reverse osmosis organisation, the chances of you having bacteria in that reverse osmosis system are very depression. But if you haven't cleaned or disinfected information technology for several years or since information technology was installed, it'due south definitely due. So a couple things to proceed in listen before you get started, y'all need a full replacement set of filters and a replacement membrane for your contrary osmosis system, because the quondam ones you lot tin can not reuse once you've disinfected the system.

Gary The Water Guy:
Secondly, you demand to have some kind of a disinfectant. So Sani-System works extremely well. It'south designed really for this purpose, or you can use a few tablespoons of chlorine, bleach basically. And it's very advisable to know how a reverse osmosis organization really works. So if you're non sure, I definitely suggest you check out my video. I'll put a link in the clarification down below and click on it, check it out, and you'll definitely appreciate that going forrard.

Gary The Water Guy:
Then there's a few precautions yous need to take to make certain y'all're non introducing bacteria into the reverse osmosis arrangement during the filter change or when you're irresolute the membrane. So make sure you wash your hands with soap and water before the process. Besides, yous can wearable gloves to continue everything nice and clean. I also propose putting downwardly a nice clean cloth so that you're working on that while you lot're doing the whole process. If in that location's any mold on the outside of the reverse osmosis system, you definitely have to get rid of that. And thirdly, brand sure yous leave the filters wrapped up until you really demand them and before you're actually putting them into the system.

Gary The H2o Guy:
During the disinfection process, they'll besides be several occasions where you're going to accept to disengage the tubing from the quick connect fittings. To practise that, you just push button in on the end, agree the neckband back and pull it out and then to reconnect information technology, you button in until y'all feel some resistance and then push button a little flake harder and brand sure that it's locked in identify. If yous'd similar some more information nearly that, I have a neat YouTube video and I'll put a link in the description down below and you tin can bank check it out for some more information.

Gary The Water Guy:
All right, and so let's get started. The first thing you're going to do is shut off the water to the whole system. You'll have a ball valve shutoff that looks something like this and so so yous just plow it 90 degrees. That shuts off the menstruum. Whatever management the handle is in is what direction the water's flowing, then that shuts it off. And and then what y'all're going to do is you lot're going to open upwardly your faucet and you're going to open it up and let all the water run out. Yous're going to be draining the tank totally, then it's going to take a fiddling while for it to run. So let information technology menstruation correct til it slows correct downwards to nothing. At first, it's going to flow very quickly, simply as time goes past, it'southward going to go slower and slower and slower. That might hands take 10 minutes.

Gary The Water Guy:
So now's the time that if there's any mold on the outside of your reverse osmosis system, to bargain with that. What I suggest to you use a spray cleaner, any kind of spray cleaner. Spray the whole unit. Let it sit down for several minutes and then it has time to seep in and and so employ a toothbrush or something similar that to get into all the nooks and crannies to clean it all out, rinse it all off, make sure that it's nice and clean on the outside.

Gary The Water Guy:
And then you'll use your filter housing branch to remove the filter housing. And so you lot're going to start at your sediment filter. Your sediment filter will typically exist phase 1. Then y'all use the wrench and unscrew the filter housing. Yous're going to open it up. You're going to discard the filter that'due south inside. You're going to dump all the water out, but you're going to leave the filter housing off. And then yous're going to go along to phase two and to stage three. You're going to remove all of the filters, but phase two and stage 3, again, you're going to dump out the filters, yous're going to dump out the h2o, but yous're going to put the filter housing back on and snug it up and so it doesn't leak.

Gary The Water Guy:
Next you're going to take to disconnect the tubing on the end of the membrane so you can open up up the membrane housing to get the membrane out. So once again, it's 1 of these quick connect fittings. What you're going to exercise is you're going to forcefulness the tubing in, concord the collar back and pull the tubing out directly and and then we'll elevator this up and remove the postal service filter for a second and and then you lot unscrew the cap. Now I've loosened this upward alee of fourth dimension, and then you may very well have to utilize tools to unscrew the cap. Then you're going to pull out the membrane.

Gary The H2o Guy:
Now the membrane does non come up out very easily, so you probably want to use needle nose pliers, and you just twist it a piddling bit, then pull and the membrane comes out. So you're going to set the membrane aside because you don't want the membrane in when yous're doing the disinfection process. Remember I said, you lot're going to be replacing all these things afterwards. So then you're going to close this support, reconnect the tubing. We'll put this filter back on top here, like and then. Then nosotros're going to reconnect the tubing to the membrane right at that place. And again, slide it and make sure information technology locks into place. Now, the filter on the height, the postal service carbon, you would but go out in place. I mean, nosotros're going to ruin it during this disinfection process and we're going replace it a trivial bit later.

Gary The Water Guy:
At this stage, you're going to install a shutoff valve on the drain line and the reason is because you want to be able to shut off the sanitizer and trap it within the system. You just cut the line and install this fitting, leave it open for now. Then the next stage is, you lot've got the sediment filter housing that's removed from the manifold, and you're going to cascade the Sani-Organization into the sediment filter housing. If you chose not to use Sani-System, for whatsoever reason, you can use three tablespoons of chlorine or bleach. So you thread the housing back onto the manifold.

Gary The Water Guy:
And then you're going to go to your shut off, the primary supply close off to your contrary osmosis arrangement, and you're going to open that up and water's going to start flowing through the organisation and it's going to pick up that disinfectant and information technology's going to run throughout the whole organisation. At present, when you start to get some h2o flowing to the drain, remember we've put in this close-off to the bleed, so yous're going to have some h2o and disinfect and get-go flowing out. One time you offset seeing that, you only shut this then you trap it inside. And then it's going to continue to fill this whole system. I mean, obviously y'all're going to be checking for leaks, make sure there aren't whatever and make sure your tank valve is broad open, like this ane hither, in the open position so that the disinfectant also fills in the tank.

Gary The H2o Guy:
You're going to fill up the whole system. You're going to brand sure that the faucet at the kitchen sink is closed so you don't have whatsoever water flowing out of that. Then you're going to fill the whole arrangement. In one case it'south full, and then you allow information technology sit for v minutes and it'south going to disinfect the whole arrangement. If your contrary osmosis system is too continued up to your fridge, and then brand sure that line is on and you lot've got some disinfectant flowing through that too, to brand sure everything is disinfected. Afterwards the five infinitesimal expect time, then you tin flush it out. What you demand to do at that bespeak is you lot need to open up the faucet, permit the water period, and drain everything downwards. And then while it's draining down, at some point you may want to shut off the supply, so that y'all make sure that you lot fully empty the reverse osmosis tank. Once it's fully empty, and so you can open this up again.

Gary The Water Guy:
Once you've done out all of the disinfectant, of form, you've opened up this drain line, yous've washed everything out, and then what you would do is yous would place the filters. Now, if you're not sure how to practice the filter replacement, I'll put a link to a video on that in the clarification down below, so you can check that out.

Gary The H2o Guy:
Once the new filters have been installed, then you're going to want to fill up the whole organisation and you're going to want to flush it. Yous need to fill the whole arrangement, which is going to take near two to iii hours to fill, and then y'all're going to open up up the faucet, affluent it till the water flows downwards to a trickle. Permit it fill again. Once more, two to 3 hours. Open up the faucet, flush it, allow it fill up once again and flush information technology. You lot're going to desire to flush the three times considering the reverse osmosis membrane has a preservative in it and you lot want to make sure yous flush all of that out. For my next video on reverse osmosis drinking water systems, click up here and I'll see you there.

Source: https://waterestore.ca/blogs/news/a-step-by-step-on-how-to-clean-your-reverse-osmosis-ro-system

Posted by: fawcettanob1951.blogspot.com

Share this post